Command Broom Gripper Review: Useful Utility-Closet Fix or Weak Hook?

The Command Broom Gripper is a useful little product when the job is narrow: hold one light broom, duster, or mop handle on a smooth wall without drilling. It is not a magic fix for a crowded utility closet full of wet mops, heavy push brooms, and mystery handles.

This review focuses on utility closets, apartment laundry nooks, and small kitchens where floor-standing broom piles block the door. If you need a multi-tool rail instead, start with our wall-mounted broom holder guide before assuming one adhesive gripper should hold everything.

Quick verdict

• Consider it if you need one renter-friendly holder for a light broom: Search Amazon for Command Broom Gripper
• Choose a screw-mounted rail for heavy tools: Search Amazon for screw mounted broom holder rail
• Choose an over-door organizer when adhesive is risky: Search Amazon for over door broom organizer

What the Command Broom Gripper does well

It gets a handle off the floor without requiring a drill. That is valuable in rentals, finished laundry closets, and kitchens where a broom slides behind the trash can every week. The gripper style is also simpler than a hook because the handle snaps into a holding point instead of swinging from a loop.

The biggest advantage is placement testing. You can put one gripper exactly where the broom naturally returns, live with it for a week, and learn whether the spot works before committing to a rail. For a one-broom household, that may be enough.

Where it disappoints

Adhesive broom grippers fail when people ask them to act like hardware. Heavy wet mops, rough garage walls, dusty paint, textured surfaces, and sideways yanking all work against the adhesive. A gripper installed too low may also make the broom head drag on the floor; installed too high, it becomes awkward to snap the handle in.

It is also not a category system. If the closet holds a broom, mop, Swiffer, dustpan, vacuum wand, and extension pole, one gripper only removes one handle from the pile. A rail or separate zones will work better.

Fit and installation checks

Check the current package instructions and weight rating before buying because adhesive products change over time. 3M’s Command instructions emphasize surface cleaning, waiting before loading, and pulling the removal strip correctly. Those details are not decorative; they are the product.

Measure the handle diameter and the tool height. The broom head should clear the floor, and the handle should not hit shelves or the door. Clean the wall, let it dry, press firmly for the instructed time, and wait the required cure period before loading. Do not install over peeling paint, wallpaper, raw wood, brick, or dusty utility-room walls unless the product specifically allows that surface.

Utility-closet scenarios

For an apartment kitchen with one light broom, the Command Broom Gripper is a clean first pick. Mount it near the trash can or pantry door, wherever the broom already ends up. Keep the dustpan on a separate hook or shelf so the gripper is not asked to hold two tools.

For a laundry closet with a broom and a spray mop, use two grippers only if both tools are light and dry. Wet pads and full mop heads add weight and humidity. If the mop normally returns damp, use a vented spot where it can dry before storage.

For a garage or basement utility wall, skip adhesive and use a screw-mounted rail. Temperature swings, dust, and heavier tools make adhesive less attractive. A rail also spaces tools so one handle does not knock another down.

Clutter Science score

Overall, it is a good test product and a limited permanent fix. It deserves space in a small closet when the tool count is low and the wall surface is friendly.

What to buy instead

Buy a screw-mounted rail if you own the space, store heavy tools, or need four or more slots. Look for rubber grippers plus hooks for dustpans and brushes. Mount into studs or appropriate anchors, and avoid drilling where electrical or plumbing lines may run.

Buy an over-door organizer if wall paint is fragile or if the closet door has enough clearance. It keeps tools vertical without adhesive, but it can rattle when the door moves and may interfere with door closure.

Buy a freestanding slim tool stand only when wall and door options are unavailable. Floor stands are easy to move but can become another obstacle in narrow closets.

Command Broom Gripper FAQ

Can it hold a wet mop?

Usually that is the wrong job. Wet mop heads add weight and moisture, and the tool may need airflow before storage. Use a stronger rail or let the mop dry before hanging.

Will it damage paint?

It is designed for removable mounting on approved surfaces when installed and removed correctly, but weak paint, old paint, and improper removal can still cause damage. Follow the current package instructions.

How many should I buy?

Start with one or two. If you need to hang a whole cleaning set, a rail is usually cleaner and more stable than a row of separate adhesive grippers.

Sources

• Command product instructions and surface guidance
• ESFI: Extension cord and home electrical safety